2014 Toyota Tundra Check Engine Light

2014 Toyota Tundra Check Engine Light

If the check engine light in your 2014 Toyota Tundra starts flashing, that means that the problem needs attention quickly and your Toyota should be brought in rapidly. A flashing light signifies that the problem is extremely serious and if not taken care of quickly may result in major and serious damage to the car. This blinking light frequently signifies a severe engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can quickly raise the temperature of the catalytic converter to a point where damage is likely, requiring an expensive and major repair. Some owners ask if spark plugs cause the check engine light to flash? This can precisely be the cause. A defective, old or dirty spark plug can cause the engine to misfire. If the problem is entirely ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very costly repair. If your check engine light is always flashing, please contact our team of automotive experts at Nalley Toyota Union City expeditiously by calling 7702848361.

Is it safe to drive your 2014 Toyota Tundra with the check engine light on?

If the check engine light is flashing, this means that there is a serious issue and it is recommended to service your Toyota Tundra immediately. This question is not remarkably simple because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be secure to drive. This is typically indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more serious problem. Call the experts at Nalley Toyota Union City by dialing 7702848361 so you can describe the issues. Or lessen your speed and bring your 2014 Toyota to our certified mechanics as in the near future as imaginable.

Will the check engine light reset itself?

The check engine light on your 2014 Toyota Tundra will frequently shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will promptly turn itself off. Again, if your catalytic converter is working properly, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2014 Toyota Tundra light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Nalley Toyota Union City so the light and code can be double-checked and reset.

2014 Toyota Tundra Check Engine Light Flashing

Although there are countless potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several common causes including something as simple as a loose gas cap. Other mostly common reasons for a Check Engine Light are damaged oxygen sensor, faulty emissions control part, a malfunction with the fuel injection system, faulty head gasket, dirty mass airflow sensor, or faulty spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Toyota Certified Mechanics and the certified service protocol to isolate the root problem and utterly repair it as needed to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Toyota issue was entirely fixed.

Every 2014 Toyota Tundra was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the car on its important systems. The speedy sensors are continually detecting conditions while sending vital data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. Yet, unfortunately that is the limitation of the Check Engine Light – it won’t tell you what explicitly is wrong nor what to do about it. That’s where we come in; Nalley Toyota Union City provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Very Qualified Service professional.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is generally between $88 and $111. The good news, Nalley Toyota Union City offers entirely free multi-point inspections and free diagnostics, in most cases, to help determine the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not correctly tightened to a more serious failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it good to get the proper code reading and diagnosis.

Check Engine Light Service 2014 Toyota Tundra

What do you do when you’re driving along in your Toyota Tundra and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Toyota owners, your heart sinks drastically because you may have explicitly idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep, calm breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2014 Toyota Tundra checked expeditiously. Ignoring that warning could end up causing major, extensive damage to expensive engine parts.

When your 2014 Toyota Tundra's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t correct, a computer turns on your check engine light. This amber or yellow light is generally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that can swiftly identify the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Toyota auto repair mechanics at Nalley Toyota Union City. There are still a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you select that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to determine the definitely correct issue and repair it.

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy accordingly. Since each check engine code has its own level of severity, it is ordinarily difficult to predict how many miles you can be secure in driving with the warning light on. It could be anything from a bad sensor to plug wires needing to be replaced. If you check engine light is flashing, we recommend that you pull over and contact Nalley Toyota Union City to help determine if your car is secure to drive in or if we recommend a tow truck.

2014 Toyota Tundra Check Engine Light Codes

The check engine light turning on can be quite intimidating, particularly to see that little light on your vehicle’s dashboard suddenly illuminate, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, likewise known as the OBD (on-board computer diagnostic system) in your Tundra. There are hundreds of different codes that your check engine light can properly represent. While that sounds daunting, with a little patience, tackling basic diagnostics will give you advantageous knowledge about your car and will likewise allow that important Check Engine Light to do what it is really supposed to do: be your guide. Sadly, obvious and helpful car symptoms do not invariably accompany an illuminated Check Engine Light. Since there are hundreds of imaginable OBD codes, there are likewise hundreds of imaginable reasons for the light, including:

• O2 Sensor
• Computer output circuit issues
• Old Battery
• Fuel and air metering systems problems
• Bad Spark Plugs
• Ignition system faults
• Emissions controls issues
• Transmission issues
• Loose Gas Cap or Missing Gas Cap

This is why it is essential for someone who does not have a lot of prevailing automotive knowledge to not assume what a code means. Call Nalley Toyota Union City at 7702848361 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out instantly by a skillful certified Toyota mechanic. If the engine light comes on due to a serious concern, you risk damaging your vehicle further by not repairing the issue right away.

What Does the Check Engine Light Mean?

One of the most usually misunderstood lights or indicators in your 2014 Toyota Tundra is the check engine light. The check engine light is part of the vital onboard diagnostics system, and displays in an assortment of different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your car. Onboard computers increasingly have controlled and monitored car performance since the 80s and do an assortment of things for your 2014 Toyota Tundra. Some of these essential duties include ignition timing, shifting automatic transmissions controlling engine speed, and implementing cohesion control, just to name a few. With that being said, the check engine light can mean a variety of different things. It can be as simple as your gas cap being loose or as hazardous as engine knocking. If your check engine light is on in your 2014 Toyota Tundra, contact Nalley Toyota Union City. Our Toyota service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is flashing. Contact Nalley Toyota Union City today!

What could cause the check engine light to come on in a 2014 Toyota Tundra?

When your check engine light comes on, this could be as simple as tightening or replacing your gas cap. Still, the check engine light could likewise be a warning of an essential problem that could cause serious damage to your engine and come with a hefty and costly repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady and continuous glow generally means something less serious but a flashing check engine light indicates that your vehicle’s engine is in significant trouble and useful service is needed promptly. If your check engine light is flashing in your 2014 Toyota Tundra, we immensely advocate not to drive the vehicle and schedule Toyota service today. Below is a list of the most common reasons your check engine light can come on:

• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns more instantly and your vehicle will be less efficient when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause significant damage to your catalytic converter and your 2014 Toyota Tundra's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the exactly correct mixture of air and fuel that enters the cylinders in your engine. A faulty O2 sensor can also cause a vehicle to fail an emissions test.
• Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2014 Toyota Tundra’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is frequently caused by consistently neglected maintenance, which is why Nalley Toyota Union City offers a free multi-point inspection with every Toyota service. If you have an issue with your catalytic converter and don't get it repaired, your 2014 Toyota Tundra will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your vehicle may run at a higher temperature, too, which can cause other perilous problems from overheating.
• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Toyota Tundra is what determines how much fuel is required to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to certain changes, like altitude. If your Toyota Tundra is having trouble starting, idling rough or has a sudden quick change in the position of the throttle pedal, this could be a essential sign of a faulty mass airflow sensor.
• The battery is low or dead. The battery in your 2014 Toyota Tundra is every critical. Without a vehicle battery, your vehicle won’t start, light up the road in front, play the radio or charge your phone. Today’s vehicle batteries last much longer than they did a few decades ago, and they don't really require maintenance. The price of a new one depends on the type of Toyota you drive, but check our current service coupons and specials.
• One of the most common and frequent cause is that your 2014 Toyota Tundra gas cap is loose, damaged or missing. The gas cap for your 2014 Toyota Tundra serves different purposes. It prevents perilous gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a faulty fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump and be more costly. Luckily, to replace a gas cap isn't pricey. If your check engine light turns on expeditiously after you put gas in your 2014 Toyota Tundra, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• New Spark Plugs or Plug Wires are required for your 2014 Toyota Tundra. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run smooth. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience a noticeable poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, leading to more pricey repairs.
• Your 2014 Toyota Tundra has a vacuum leak. Every Toyota Tundra has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower adverse emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to intense heat or extreme cold.
• Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak extreme havoc on your 2014 Toyota Tundra if it’s not installed correctly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound familiar, bring your Tundra to Toyota and have our team of gifted certified mechanics ensure that your aftermarket items were installed perfectly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a little bit more but could help you save considerably from having to get poor work and damage caused by poor installation work corrected.