Please wait while the page loads...

How many miles can you drive with the check engine light?

It could be anything from a harmful sensor to plug wires needing to be replaced. Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. If you check engine light is flashing, we recommend that you pull over and contact Nalley Toyota Union City to help select if your vehicle is safe to drive in or if we recommend a tow truck. The safest bet is to decipher the code and then plan your strategy accordingly.

Check Engine Light Service 2020 Toyota Tacoma

What do you do when you’re driving along in your Toyota Tacoma and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Toyota owners, your heart sinks a slight because you have slight idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the price of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the automobile over to the side of the road and call a tow truck, but it is recommended that you get your 2020 Toyota Tacoma checked as soon as realistic. Ignoring that warning could end up causing major damage to expensive engine components.

When your 2020 Toyota Tacoma's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t suitable, a computer turns on your check engine light. This amber or yellow light is generally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Toyota auto repair mechanics at Nalley Toyota Union City. There are also a number of relatively bargain code readers that are designed for do-it-yourselfers, should you embrace that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to choose the issue and repair it.

How much does it cost to get the engine light checked?

The intermediate cost for a check engine light diagnosis & testing is naturally between $88 and $111. The astonishing news, Nalley Toyota Union City offers complimentary multi-point inspections and free diagnostics, in most cases, to help determine the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not appropriately tightened to a more strict failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it astonishing to get the exact code reading and diagnosis.

What Does the Check Engine Light Mean?

One of the most usually misunderstood lights or indicators in your 2020 Toyota Tacoma is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few substitute ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light brightens in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a assortment of things for your 2020 Toyota Tacoma. Some of these include shifting automatic transmissions controlling engine speed, ignition timing, and implementing stability control, just to name assorted. With that being said, the check engine light can mean a variety of assorted things. It can be as easy as your gas cap being loose or as unsafe as engine knocking. If your check engine light is on in your 2020 Toyota Tacoma, contact Nalley Toyota Union City. Our Toyota service department can help you find out what code is turning your check engine light on or investigate why your check engine light is flashing. Contact Nalley Toyota Union City today!

2020 Toyota Tacoma Check Engine Light Flashing

Although there are countless possible causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are a few essential causes including something as straightforward as a loose gas cap. Back-up essential reasons for a Check Engine Light are faulty emissions control part, dirty mass airflow sensor, faulty head gasket, damaged oxygen sensor, a malfunction with the fuel injection system, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Toyota Certified Technicians and the certified service protocol to isolate the root problem and repair it as decisive to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Toyota issue was fixed.

Every 2020 Toyota Tacoma was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the car on its difficult systems. The sensors are continually detecting conditions while sending data to the professional control unit. If the professional control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what totally is wrong nor what to do about it. That’s where we come in; Nalley Toyota Union City provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Exceptionally Qualified Service professional.

Will the check engine light reset itself?

The check engine light on your 2020 Toyota Tacoma will usually shut itself off if the issue or code that caused it to turn on is revamped. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going accessible, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2020 Toyota Tacoma light will go off after about 20-40 miles. If you drive over that deposit and the light is still on, you will need to deliver it in to Nalley Toyota Union City so the light and code can be double-checked and reset.

Is it safe to drive your 2020 Toyota Tacoma with the check engine light on?

If the check engine light is flashing, this means that there is a persuasive issue and it is recommended to service your Toyota Tacoma today. This question is not very suitable because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is normally indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more persuasive problem. Call the specialists at Nalley Toyota Union City by dialing 7702848361 so you can describe the issues. Or reduce your speed and bring your 2020 Toyota to our certified mechanics as soon as viable.

2020 Toyota Tacoma Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that miniature light on your vehicle’s dashboard promptly lights up, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Tacoma. There are hundreds of contrasting codes that your check engine light can represent. While that sounds daunting, with a miniature patience, tackling considerable diagnostics will give you comfortable knowledge about your vehicle and will also allow that Check Engine Light to do what it is explicitly supposed to do: be your guide. Unfortunately, indisputable and helpful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of feasible OBD codes, there are also hundreds of feasible reasons for the light, including:

  • O2 Sensor
  • Bad Spark Plugs
  • Fuel and air metering systems problems
  • Emissions controls issues
  • Loose Gas Cap or Missing Gas Cap
  • Transmission issues
  • Old Battery
  • Ignition system faults
  • Computer output circuit issues

This is why it is main for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out quickly by a certified Toyota mechanic. Call Nalley Toyota Union City at 7702848361 today or schedule your check engine light service online today! If the engine light comes on due to a risky concern, you risk destructive your car extra by not repairing the issue right away.

2020 Toyota Tacoma Check Engine Light

If the check engine light in your 2020 Toyota Tacoma starts glaring, that means that the problem needs quick attention and your Toyota should be brought in now. A glaring light indicates that the problem is momentous and if not taken care of now may result in major damage to the vehicle. This blinking light naturally hints a rigorous engine misfire allowing unburned fuel to be drained into the exhaust system. There it can quickly increase the temperature of the catalytic converter to a point where damage is achievable, requiring an costly repair. Some owners ask if spark plugs cause the check engine light to flash? This can exactly be the cause. A bad, common or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a extraordinarily expensive repair. If your check engine light is flashing, please contact our team of automotive veterans at Nalley Toyota Union City instantly by calling 7702848361.

What could cause the check engine light to come on in a 2020 Toyota Tacoma?

When your check engine light comes on, this could be as classic as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a hazardous problem that could cause hazardous damage to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A consistent glow constantly means something less hazardous but a flashing check engine light indicates that your vehicle’s engine is in hazardous trouble and service is mandatory rapidly. If your check engine light is flashing in your 2020 Toyota Tacoma, we extremely recommend not to drive the automobile and schedule Toyota service today. Below is a list of the most famous reasons your check engine light can come on:

  • New Spark Plugs or Plug Wires are needed for your 2020 Toyota Tacoma. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or classical, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, best to more expensive repairs.
  • Your O2 Sensor (Oxygen Sensor) needs to be replenished. The Oxygen sensor, established as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be fewer efficient when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2020 Toyota Tacoma's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • Your mass airflow sensor (known as MAF) needs to be replenished. The mass airflow sensor in your Toyota Tacoma is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to authentic changes, like altitude. If your Toyota Tacoma is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2020 Toyota Tacoma’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Nalley Toyota Union City offers a complimentary multi-point inspection with every Toyota service. If you have an issue with your catalytic converter and don't get it repaired, your 2020 Toyota Tacoma will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause divergent problems from overheating.
  • Your 2020 Toyota Tacoma has a vacuum leak. Every Toyota Tacoma has a vacuum system that performs a roomy variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, exceedingly if they’re exposed to exciting heat or extreme crisp.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or divergent item can wreak havoc on your 2020 Toyota Tacoma if it’s not installed correctly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even stop the vehicle from starting. If these issues sound commonplace, bring your Tacoma to Toyota and have our company of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, exceedingly aftermarket parts and accessories, or using OEM parts authentic place might value a tiny bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • The battery is low or dead. The battery in your 2020 Toyota Tacoma is every curious. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did assorted decades ago, and they don't really require maintenance. The estimate of a new one depends on the type of Toyota you drive, but check our existing service coupons and specials.
  • One of the most common and countless cause is that your 2020 Toyota Tacoma gas cap is loose, damaged or missing. The gas cap for your 2020 Toyota Tacoma serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is classical or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on instantly after you put gas in your 2020 Toyota Tacoma, authentic thing you should check is to make courageous the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.