Please wait while the page loads...

Will the check engine light reset itself?

The check engine light on your 2016 Toyota Tacoma will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2016 Toyota Tacoma light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to transport it in to Nalley Toyota Union City so the light and code can be double-checked and reset.

2016 Toyota Tacoma Check Engine Light Flashing

Although there are countless potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are many daily causes consisting something as visible as a loose gas cap. Divergent daily reasons for a Check Engine Light are dirty mass airflow sensor, faulty head gasket, a malfunction with the fuel injection system, faulty emissions control part, damaged oxygen sensor, or defective spark plugs to name plentiful. No matter what is the root cause of the Check Engine Light, we have the Toyota Certified Technicians and the certified service protocol to isolate the root problem and repair it as paramount to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Toyota issue was revamped.

Every 2016 Toyota Tacoma was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its hard systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what strictly is wrong nor what to do about it. That’s where we come in; Nalley Toyota Union City provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service mechanical.

2016 Toyota Tacoma Check Engine Light

A flashing light indicates that the problem is productive and if not taken care of quickly may result in major damage to the vehicle. If the check engine light in your 2016 Toyota Tacoma starts flashing, that means that the problem needs hasty attention and your Toyota should be brought in quickly. This shining light usually implies a rigid engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can swiftly increase the temperature of the catalytic converter to a point where damage is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can strictly be the cause. A destructive, old or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our team of automotive experts at Nalley Toyota Union City expeditiously by calling 7702848361. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair.

Check Engine Light Service 2016 Toyota Tacoma

What do you do when you’re driving along in your Toyota Tacoma and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Toyota owners, your heart sinks a scant because you have scant idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the automobile over to the side of the road and call a tow truck, but it is recommended that you get your 2016 Toyota Tacoma checked as soon as usable. Ignoring that warning could end up causing major break to pricey engine elements.

When your 2016 Toyota Tacoma's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t honest, a computer turns on your check engine light. This amber or yellow light is frequently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is learn with an electronic inspect tool that is used by our Toyota auto repair mechanics at Nalley Toyota Union City. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to determine the issue and repair it.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not well tightened to a more relentless failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it valuable to get the respectable code reading and diagnosis. The intermediate cost for a check engine light diagnosis & testing is mostly between $88 and $111. The valuable news, Nalley Toyota Union City offers complimentary multi-point inspections and free diagnostics, in most cases, to help indicate the cause of your check engine light.

What could cause the check engine light to come on in a 2016 Toyota Tacoma?

When your check engine light comes on, this could be as simple as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a perilous problem that could cause perilous damage to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A functional glow commonly means something less perilous but a glaring check engine light indicates that your vehicle’s engine is in perilous trouble and service is needed shortly. If your check engine light is glaring in your 2016 Toyota Tacoma, we very advise not to drive the vehicle and schedule Toyota service today. Below is a list of the most simple reasons your check engine light can come on:

  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Toyota Tacoma is what determines how much fuel is needed to run your engine efficiently by measuring the deposit of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to genuine changes, like altitude. If your Toyota Tacoma is having trouble starting, idling rough or has a hasty change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • The battery is low or dead. The battery in your 2016 Toyota Tacoma is every effective. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did various decades ago, and they don't really require maintenance. The price of a new one depends on the type of Toyota you commute, but check our actual service coupons and specials.
  • New Spark Plugs or Plug Wires are needed for your 2016 Toyota Tacoma. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or traditional, you will experience low performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, large to more expensive repairs.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2016 Toyota Tacoma’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Nalley Toyota Union City offers a complimentary multi-point inspection with every Toyota service. If you have an issue with your catalytic converter and don't get it serviced, your 2016 Toyota Tacoma will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause extra problems from overheating.
  • Your 2016 Toyota Tacoma has a vacuum leak. Every Toyota Tacoma has a vacuum system that performs a considerable assortment of functions. The vacuum system also helps lessen harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can bare out and crack, especially if they’re exposed to imposing heat or extreme brisk.
  • One of the most classic and frequent cause is that your 2016 Toyota Tacoma gas cap is loose, damaged or missing. The gas cap for your 2016 Toyota Tacoma serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is traditional or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on immediately after you put gas in your 2016 Toyota Tacoma, earliest thing you should check is to make courageous the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or extra item can wreak havoc on your 2016 Toyota Tacoma if it’s not installed appropriately. These aftermarket parts and accessories can dump the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound noted, transport your Tacoma to Toyota and have our team of certified mechanics ensure that your aftermarket items were installed perfectly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts earliest place might cost a miniature bit more but could save you money from having to get low work and damage caused by low installation work corrected.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the deposit of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less realistic when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2016 Toyota Tacoma's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to mean the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.

What Does the Check Engine Light Mean?

One of the most usually misunderstood lights or indicators in your 2016 Toyota Tacoma is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few added ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2016 Toyota Tacoma. Some of these include controlling engine speed, ignition timing, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can mean a variety of distinctive things. It can be as natural as your gas cap being loose or as strict as engine knocking. If your check engine light is on in your 2016 Toyota Tacoma, contact Nalley Toyota Union City. Our Toyota service department can help you find out what code is turning your check engine light on or scan why your check engine light is blinking. Contact Nalley Toyota Union City today!

How many miles can you drive with the check engine light?

If you check engine light is shining, we recommend that you pull over and contact Nalley Toyota Union City to assist designate if your vehicle is firm to drive in or if we recommend a tow truck. The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a bad sensor to plug wires needing to be replaced. Since each check engine code has its own level of severity, it is difficult to predict how frequent miles you can drive with the warning light on.

2016 Toyota Tacoma Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that small light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Tacoma. There are hundreds of various codes that your check engine light can represent. While that sounds daunting, with a small patience, tackling basic diagnostics will give you essential knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, different and actual vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of potential OBD codes, there are also hundreds of potential reasons for the light, including:

  • Fuel and air metering systems problems
  • Old Battery
  • O2 Sensor
  • Emissions controls issues
  • Computer output circuit issues
  • Bad Spark Plugs
  • Loose Gas Cap or Missing Gas Cap
  • Ignition system faults
  • Transmission issues

This is why it is innate for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out shortly by a certified Toyota mechanic. Call Nalley Toyota Union City at 7702848361 today or schedule your check engine light service online today! If the engine light comes on due to a curious concern, you risk bad your car further by not repairing the issue right away.

Is it safe to drive your 2016 Toyota Tacoma with the check engine light on?

If the check engine light is flashing, this means that there is a remarkable issue and it is recommended to service your Toyota Tacoma urgently. This question is not very straightforward because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is often indicated by a consistent glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more imposing problem. Call the experts at Nalley Toyota Union City by dialing 7702848361 so you can describe the issues. Or reduce your speed and bring your 2016 Toyota to our certified mechanics as soon as achievable.