Please wait while the page loads...

2013 Toyota Camry Check Engine Light Flashing

Although there are innumerable feasible causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are innumerable adequate causes encompassing something as straightforward as a loose gas cap. Further adequate reasons for a Check Engine Light are damaged oxygen sensor, dirty mass airflow sensor, faulty emissions control part, faulty head gasket, a malfunction with the fuel injection system, or defective spark plugs to name a lot. No matter what is the root cause of the Check Engine Light, we have the Toyota Certified Technicians and the certified service protocol to isolate the root problem and repair it as paramount to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Toyota issue was fixed.

Every 2013 Toyota Camry was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its vital systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is wrong nor what to do about it. That’s where we come in; Nalley Toyota Union City provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Remarkably Qualified Service trained.

2013 Toyota Camry Check Engine Light

A flashing light hints that the problem is treacherous and if not taken care of promptly may result in extensive break to the car. If the check engine light in your 2013 Toyota Camry starts flashing, that means that the problem needs immediate attention and your Toyota should be brought in promptly. This twinkling light ordinarily indicates a rigorous engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can immediately increase the temperature of the catalytic converter to a point where wear and tear is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can solely be the cause. A bad, common or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our team of automotive veterans at Nalley Toyota Union City shortly by calling 7702848361. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a incredibly expensive repair.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more unhealthy failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it appealing to get the suitable code reading and diagnosis. The middle rate for a check engine light diagnosis & testing is commonly between $88 and $111. The appealing news, Nalley Toyota Union City offers complimentary multi-point inspections and free diagnostics, in most cases, to aid find out the cause of your check engine light.

How many miles can you drive with the check engine light?

It could be anything from a harmful sensor to plug wires needing to be replaced. The safest bet is to decipher the code and then plan your strategy accordingly. If you check engine light is flashing, we recommend that you pull over and contact Nalley Toyota Union City to help prefer if your vehicle is dependable to drive in or if we recommend a tow truck. Since each check engine code has its own level of severity, it is hard to predict how many miles you can drive with the warning light on.

What could cause the check engine light to come on in a 2013 Toyota Camry?

When your check engine light comes on, this could be as straightforward as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a dreadful problem that could cause dreadful wear and tear to your engine and come with a sizable repair bill. Depending on your make and model, the check engine light will illuminate or blink. A factual glow typically means something less dreadful but a flashing check engine light indicates that your vehicle’s engine is in dreadful trouble and service is mandatory quickly. If your check engine light is flashing in your 2013 Toyota Camry, we exceedingly recommend not to drive the car and schedule Toyota service now. Below is a list of the most familiar reasons your check engine light can come on:

  • The battery is poor or dead. The battery in your 2013 Toyota Camry is every remarkable. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a lot decades ago, and they don't genuinely require maintenance. The price of a new one depends on the type of Toyota you drive, but check our current service coupons and specials.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the discharge of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your automobile will be less active when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 Toyota Camry's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to choose the right mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • Your 2013 Toyota Camry has a vacuum leak. Every Toyota Camry has a vacuum system that performs a wide mixture of functions. The vacuum system also helps lessen harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, exceptionally if they’re exposed to gigantic heat or extreme frigid.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Toyota Camry is what determines how much fuel is fundamental to run your engine efficiently by measuring the discharge of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to substantial changes, like altitude. If your Toyota Camry is having trouble starting, idling rough or has a rapid change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak havoc on your 2013 Toyota Camry if it’s not installed properly. These aftermarket components and accessories can discharge the battery, trigger the check engine light, or even prohibit the automobile from starting. If these issues sound routine, bring your Camry to Toyota and have our squad of certified technicians ensure that your aftermarket items were installed properly and aren't causing any issue. Getting accessories, exceptionally aftermarket parts and accessories, or using OEM components initial place might rate a small bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • One of the most innate and frequent cause is that your 2013 Toyota Camry gas cap is loose, damaged or missing. The gas cap for your 2013 Toyota Camry serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on straightaway after you put gas in your 2013 Toyota Camry, initial thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2013 Toyota Camry’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Nalley Toyota Union City offers a complimentary multi-point inspection with every Toyota service. If you have an issue with your catalytic converter and don't get it repaired, your 2013 Toyota Camry will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause other problems from overheating.
  • New Spark Plugs or Plug Wires are fundamental for your 2013 Toyota Camry. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your automobile. This explosion is what moves the pistons and makes the engine run. The spark plug wires transport the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, dominant to more expensive repairs.

Will the check engine light reset itself?

The check engine light on your 2013 Toyota Camry will usually shut itself off if the issue or code that caused it to turn on is revamped. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going reasonable, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Toyota Camry light will go off after about 20-40 miles. If you drive over that fee and the light is still on, you will need to bring it in to Nalley Toyota Union City so the light and code can be double-checked and reset.

2013 Toyota Camry Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Camry. There are hundreds of extra codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling necessary diagnostics will give you accessible knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, visible and superb vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of usable OBD codes, there are also hundreds of usable reasons for the light, including:

  • Transmission issues
  • Ignition system faults
  • O2 Sensor
  • Bad Spark Plugs
  • Loose Gas Cap or Missing Gas Cap
  • Fuel and air metering systems problems
  • Old Battery
  • Computer output circuit issues
  • Emissions controls issues

This is why it is astonishing for someone who does not have a lot of automotive knowledge to not assume what a code means. If the engine light comes on due to a relentless concern, you risk contentious your car further by not repairing the issue right away. Call Nalley Toyota Union City at 7702848361 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out promptly by a certified Toyota mechanic.

Check Engine Light Service 2013 Toyota Camry

What do you do when you’re driving along in your Toyota Camry and abruptly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Toyota owners, your heart sinks a slight because you have slight idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the vehicle over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Toyota Camry checked as soon as probable. Ignoring that warning could end up causing major damage to expensive engine parts.

When your 2013 Toyota Camry's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t prudent, a computer turns on your check engine light. This amber or yellow light is regularly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic diagnose tool that is used by our Toyota auto repair mechanics at Nalley Toyota Union City. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you embrace that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to mean the issue and repair it.

What Does the Check Engine Light Mean?

One of the most ordinarily misunderstood lights or indicators in your 2013 Toyota Camry is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few back-up ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light lights up in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a collection of things for your 2013 Toyota Camry. Some of these include controlling engine speed, ignition timing, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can mean a variety of odd things. It can be as clear as your gas cap being loose or as serious as engine knocking. If your check engine light is on in your 2013 Toyota Camry, contact Nalley Toyota Union City. Our Toyota service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is flashing. Contact Nalley Toyota Union City today!

Is it safe to drive your 2013 Toyota Camry with the check engine light on?

This question is not highly accepted because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is regularly indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more dire problem. If the check engine light is flashing, this means that there is a dire issue and it is recommended to service your Toyota Camry hastily. Call the experts at Nalley Toyota Union City by dialing 7702848361 so you can describe the issues. Or reduce your speed and bring your 2013 Toyota to our certified mechanics as soon as attainable.